FREQUENTLY ASKED QUESTIONS
Koil Boi Induction Heaters were designed with the original Dynavap cap in mind, use with Armored Caps is not recommended.
With the exception of Storm models, All Induction Heaters are designed for use with a 110v outlet.
All IHs ship with a glass cabochon base. For more information on use and specifications, see below.
To operate Coil Controllers, such as the Sol and Binary, securely connect the power cord to the back of the device, and plug the cord into a 110v outlet.
Without a coil connected, the PID will read "EEEE".
When a coil is plugged into a Sol or Binary, the PID will read its current temperature in Fahrenheit.
To change the set temperature, press or hold up or down arrows, units are shipped with a set point of 450 degrees.
When a coil is plugged into a Sol or Binary, it will automatically begin to climb to its setpoint if the unit is powered on.
For instructions on how to use the Flare or Crucible with a Sol or Binary, see below.
For information on ship times, costs, and availability, see our policy page.
Any Other Questions
Please reach out to us at firstname.lastname@example.org